Additional component for the PRIME Series

ASUS just added something new to their PRIME series to complete the lineup — the PRIME LC 240 ARGB CPU AIO Cooler. It’s a sleek, stylish addition that brings both cooling power and vibrant lighting to your setup.

Luckily, ASUS sent us a sample for us to review. In this review, we will be talking about its features and the performance of this AIO.

Specifications:

Model	Prime LC 240 ARGB
Water Block	Water block dimention:65.1 x 60.58 x 68.5 mm Block Material (CPU Plate):Copper
Radiator	Radiator Dimension: 277 x 120 x 27 mm Tube: Sleeved Rubber tube Tube Length: 400 mm
Fan	Fan:PRIME LC 24025 Integrated Fan – Size: 2 x Fan Slots (120mm) – Dimension:240 x 123 x 25 mm – Speed: 600 – 2200 RPM +/- 10% – Static Pressure:3.2 mmH2O – Air Flow: 75.7 CFM – Noise: 34 dB(A) – Control Mode: PWM/ DC
Special Features	AURA Sync Support:Yes
Compatibility	AMD: AM5,AM4 Intel: LGA 1851, 1700, 1200, 115x
Warranty	6 years

Closer Look

The box comes in gray and white color scheme that represents the PRIME brand.

At the back are the specifications and some features of the CPU AIO Cooler.

The packaging of the AIO is as simple as it gets as PRIME is specifically tailored for entry-level enthusiasts.

Inside the box are the following: the quick-start guide, the Intel backplate, the AMD & Intel (pre-installed) brackets, screws, standoffs, and the PRIME LC 240 ARGB AIO Cooler itself.

The PRIME LC 240 ARGB has a simple design which is the usual thing you will see to AIOs that you can find in the market.

The water block has a plastic body, which is the typical casing for entry-level AIOs. The cold plate is made from copper without any nickel finish that you usually find from AIOs. The thermal grease is also pre-applied.

To control the water block, it can be connected to your motherboard through the 4-pin PWM cable for the pump speed and the 3-pin ARGB cable for the RGB lighting.

The radiator is what is typically used for AIOs, with a crossflow design fin. There are no screw guards in the fins so you should just use the provided screws for it.

There is a minor branding of ASUS on the sides of the radiator, which is minimal and doesn’t disrupt the overall looks.

The PRIME LC 24025 Integrated Fan has two 120mm fans that run from 600 to 2200 RPM, pushing plenty of air at 75.7 CFM. It keeps things cool without getting too loud at 34 dB(A) and works with both PWM and DC control. Additionally, the fans have RGB lighting, which is in the center and spread out to the fan blades.

The fans can be controlled using a 4-pin PWM cable and a 3-pin (male & female) cable for the fan speed and RGB, respectively. Though, the other end of the cable is using a proprietary one.

The tubes are reinforced, as ASUS claims. But, for me, there are the typical ones used commonly by other AIO manufacturers that are using rubber with sleeves.

The tubes are connected to the radiator through metal fittings, while going to the water block is through rubber and plastic fittings.

One of the features of this water block is that the top cap is removable, and you can exchange the infinity mirror lenses.

You can either choose the ASUS or the PRIME lenses. This would also suggest that you can mod your lenses for this AIO.

The installation process of the AIO is straightforward, and you can easily understand the instructions of the quick-start guide even as a newbie.

Benchmarks

For benchmarking, I will use Cinebench 2024. To get the data, I will use HWiNFO64.

Here are the specs of the components I will use for testing.

Specifications:
ASRock Z790 PG NOVA
Intel i5 13600KF
PNY GeForce RTX 4070 Ti SUPER OC VERTO
Kingston NV2 M.2 SSD (1TB)
Kingston Fury Renegade DDR5 RGB (48GB) 7200 MT/s
FSP VITA GM 850W
Thermaltake CORE P3 TG PRO

Results

Conclusion

The ASUS PRIME LC 240 AIO Cooler is a solid pick if you’re looking for a mix of good design, reliable performance, and a bit of customization. It stands up well against other 240mm AIOs out there.

Right off the bat, it feels well-built. The build quality is good, and all of it feels and looks top-notch. It’s the type of cooler that makes you feel like you’re getting your money’s worth.

Performance wise it is actually doing good. When you are gaming or running heavy loads on your CPU, it retains the temperature within limits without being too noisy.

The price is pretty reasonable too. It’s in the same range as other comparable AIO coolers, so you’re not overpaying for what you get. For the quality and performance, it offers, it feels like a fair deal.

A really nice touch is the swappable AIO lenses. You can also mod it to whatever you like to add your personal touch.

The fans are another smart design choice. ASUS went with a combined fan component, meaning fewer cables to deal with. It makes installation easier and keeps things looking clean inside your case.

The RGB lighting is just right. It’s not over the top, but it adds a stylish glow to both the water block and the fans.

If I have to nitpick, here are my issues about this AIO cooler. The fan and radiator are different shades of black, and they are noticeable, particularly if you like the colors to line up nice. Additionally, proprietary cables sometimes lead to problems. If the cable is broken, you might need to replace the cable and ask ASUS for a replacement, or you need to change the fans, which is another hassle.

Overall, the ASUS PRIME LC 240 ARGB AIO Cooler is a decent choice if you desire quality cooling with some flair. It is not perfect, but it is a good value for your money. If you can live with those minor cons, it is a good option.

You can buy the ASUS PRIME LC 240 ARGB AIO Cooler around P4,195.00 or $73 at your nearest ASUS affiliated online and physical stores.

With that, the ASUS PRIME LC 240 ARGB AIO Cooler will receive the Recommended Award from RKiologist.